TPU Windshield PPF

Windshield Protection Film

Protect the Glass You Look Through.

Ultraguard Windshield Protection Film is a crystal-clear layer made up of a liquid TPU layer that is applied over your glass to protect the surface from stone and road debris. The film blocks all UV rays, has a hydrophobic effect that can repel water, keeps the view clean, with low haze and 93% light transmission.

Liquid TPU Technology Stone Chip Protection ≥99% UV Rejection Hydrophobic Coating Low Haze Clarity (<2%)
190 Microns
Film Thickness
93%
Visible Light Transmission
12 Months
Warranty
-40°C~120°C
Temp. Resistance
Windshield Protection Film installed on car Windshield PPF · Optically Clear
Product Overview

Invisible Shield for Your Most Vulnerable Glass

Your windshield has to face a lot from flying stones, dust, and harsh UV rays. Ultraguard windshield PPF helps to protect the surface from all this road damage. The film is made from liquid TPU, which gives a clear and smooth finish to the surface that is barely noticeable once installed.

Five layers sit inside the film, and each has a job. The top layer of the film coats the surface and comes with a heat self- healing layer that protects the surface and clears all the light marks and scratches. With the strong Ashland adhesive, it holds the glass, and a release liner; all of these protect the glass.

The film light transmission stays at 93% ±2, with haze and stays under 2%, and rejects up to ≥99% of harmful UV rays. You get real protection without losing your view of the road.

Liquid TPU Build Made for a clean, clear look
Cleanroom Made Produced in a controlled environment for a smooth finish
Self-Healing Layer Light marks fade away with heat
Water- Repelling Coat Hydrophobic coating helps rain run off
Built for Premium Glass Made for the premium automotive segment
Studio Preferred Trusted by high-performance detailing studios
Film Construction

Five Layers, Built Into One Film

Every layer has one job, from the top coat that faces the road to the liner that covers the adhesive. Together they keep the film clear, help it absorb impact, and let light marks heal away.

01

Protective Top Coat

The top protective layer of the film that protects it from damage and repels water and dust.

02

Self-Healing Layer

Heat brings light marks back to a smooth finish.

03

Liquid TPU Substrate

The core layer that takes the hit from stones and debris.

04

Pressure Sensitive Adhesive (PSA)

Strong Ashland adhesive that holds the film to the glass

05

Release Liner

Covers the adhesive until installation, then peels away

Technical Data

TPU Windshield PPF

Ultraguard windshield protection film: make sure that the protection comes with clear visibility too. Engineered with liquid TPU for crystal-clear view, durability, and easy installation.

Base Film Type
Liquid TPU Substrate
Adhesive Type
Ashland Glue
Film Thickness
190 Micron / 7.5 mil
Film Specification
1.22 × 15 m
Temperature Resistance
-40°C~120°C
Visible Light Transmission
93% ±2
UV Rejection
≥ 99%
Haze
< 2%
Adhesion to Glass
≥ 500 g/25mm
Elongation
> 130%
Yellowing Resistance
≤ 2
Self-Healing Type
Heat Self-Healing
Warranty
12 Months
Anti- Rock Chip Test
Pass
Clear Visibility Provides up to 93% of VLT
Stone Chip Protection Protects your glass against stone chips
Hydrophobic Coating Repels water and dust from the surface
No Residue
Tough & Strong
Scratch Resistant
Cleans Easily & Conveniently
Heat Self-Healing
99% UV Rejection
Film Performance

9 Features That Set Windshield PPF Apart

Every layer is built for chip protection, UV blocking, and a clear view of the road.

No Residue

Leaves no sticky adhesive residue behind when the film is removed.

Tough & Strong

The liquid TPU core is built to take the hit from stones and road debris.

Scratch Resistant

A hard top coat helps the surface stand up to everyday scratches.

Heat Self-Healing

Light surface marks heal with heat, so the film keeps its smooth look.

Strong Adhesion

Ashland adhesive provides adhesion to glass of ≥ 500 g/25mm.

Crystal Clear Visibility

Visible light transmission of 93% ±2 keeps your view of the road bright and clear.

Low Haze

Haze stays below 2%, so your glass looks clean and clear.

99% UV Rejection

Rejects at least 99% of UV rays.

Hydrophobic Surface

A hydrophobic coating helps the water to sweep away from the surface.

Ultraguard Windshield PPF performance comparison
Performance graph
India Road Engineering

Why Windshield PPF Matters on Indian Roads?

Gravel, dust, harsh sun, and heavy rain hit your windshield first. Here's how the film helps.

01
Highway Stone Chip Protection

Gravel and stones thrown up on highways can chip unprotected glass. The liquid TPU film adds a layer that defends against stone chips.

02
Sand & Dust Scratches

Sand and daily wear leave marks. A scratch-resistant film with a heat self-healing layer helps keep glass smooth.

03
Harsh Sun & UV Rays

The sun is harsh on glass. It rejects at least 99% of UV and resists -40°C~120°C.

04
Rain & Road Grime

A hydrophobic coating helps water run off. Cleans easily, with clear visibility of up to 93%.

05
12-Month Warranty

Ultraguard Windshield PPF has a warranty of 12 months.

Where to Apply

Coverage & Applications

Windshield Protection Film is designed for front and rear glass surfaces on all passenger and commercial vehicles.

Front Windshield

Made for the windshield, with protection against stone chips, scratches, and UV.

Side Windows

Side glass suits Ultraguard NCT, Carbon, or Chameleon window films.

Sunroof Glass

For sunroofs, Ultraguard Sunroof PPF offers up to 96% IR rejection.

Headlight Protection

Ultraguard Headlight PPF guards against UV, yellowing, scratches, and minor impacts.

12 Months

12-Month Manufacturer Warranty

Ultraguard Windshield Protection Film is backed by a 12-month warranty, with hassle-free online registration and instant digital access to your warranty details anytime.

Claim Warranty Info

Stop the Next Chip Before It Cracks Your Glass.

Contact an authorised Ultraguard dealer for a free consultation and windshield protection quote.

FAQs

Frequently Asked Questions

Got questions about protecting your glass with film? Here are simple answers to what people ask most about Ultraguard Windshield PPF in India.

Yes, but use a film made for glass, because paint PPF is built for body panels. Ultraguard Windshield Protection Film is made for windshields, with liquid TPU and 93% ±2 visible light transmission.
It adds a clear protective layer over your windshield. Its five layers defend against stone chips, scratches, and environmental damage, block at least 99% of UV, and keep your view clear.
It's built to defend against stone chips, with a liquid TPU layer taking the hit instead of the glass. No film makes glass unbreakable, so this is strong protection and not a guarantee against every hit.
Yes, while driving on highways, stone chips and road debris are directly thrown at the glass surface, which can cause damage to the glass. To protect the glass from this damage, a windshield PPF can be very useful.
It's designed to keep your view clear. Ultraguard Windshield PPF has 93% ±2 visible light transmission and haze below 2%, so the road stays bright and sharp.
No, the film's top layer is scratch-resistant and has a self-healing layer that covers all the scratches and the light marks on the surface.
Yes, it rejects at least 99% of UV rays, which is also helpful in making the interior cool and comfortable while driving.
Ultraguard Windshield PPF comes with a 12-month warranty, registered online. Its yellowing resistance is rated ≤ 2, so it's built to stay clear.
No, the film is installed by professionals and does not leave any residue when the film is removed from the surface.
The price depends on your car and the installer, so there's no single figure. Use the Enquire Now button to ask about pricing and find an authorised Ultraguard installer.
WhatsApp